Download Print this page

PowerXL SPLITBREW CM0122 Series Use & Care Manual page 11

Advertisement

Instructions for Use
Brewing Iced Coffee
1.
Open the Lid.
2.
Fill the Water Reservoir. Refer
to the table below for the
recommended amount of water
for your desired number of
servings.
Note: Do not fill the
Water Reservoir above the
"6 MAX ICED" level.
Note: Filtered water will limit
impurities and excessive
minerals that can detrimentally
impact coffee flavor
and machine performance.
3.
Insert a basket-type paper filter
into the Brew Basket.
4.
Add your desired amount of
pre-ground coffee to the Brew
Basket. Refer to the table below
for the recommended amount of
ground coffee. Close the Lid,
making sure it clicks.
5.
Make sure the Carafe's lid is
properly attached to the empty
Carafe.
Note: Coffee may overflow if the
Carafe's lid is not placed properly.
SERVINGS
12 CUPS
8 CUPS
4 CUPS
FILL THE TANK
WITH WATER UP TO:
6 MARK
4 MARK
2 MARK
6.
If the appliance is not yet plugged
in, plug its power cord into a
standard electrical outlet.
7.
You can add additional grounds
for a stronger coffee or adjust the
amount of water provided you do
not fill the Water Reservoir above
the "6 MAX ICED" level.
8.
Add ice to the desired line
in the Carafe. Refer to the table
below for recommended
amounts of ice cubes.
9.
Place the Carafe on the
Carafe Plate.
10. Press the Iced Coffee Button to
begin brewing. The light on the
Brew Button will illuminate once
the Iced Coffee Button has been
pressed. You can cancel the
brewing process at any time by
pressing the Brew Button.
11. Once the coffee grounds have
cooled, carefully open the Lid and
discard the grounds. Afterward,
close the Lid.
Note: Unlike the Brew function,
when using the Iced Coffee
function, the Carafe Plate will not
heat up.
FILL THE PITCHER
WITH ICE UP TO:
12 MARK
8 MARK
4 MARK
QUANTITY
GROUND COFFEE
12 TBSP.
8 TBSP.
4 TBSP.
11

Advertisement

loading

This manual is also suitable for:

Splitbrew cm0122-1bpSplitbrew cm0122-1cp