Advertisement
Instructions for Use
Sneak-a-Cup Feature
If you remove the Carafe during the brewing process, the brewing process will
pause. Return the Carafe to the appliance within 30 seconds to prevent overflow.
When the Carafe is returned to the appliance, brewing will resume.
Brew Later Function
If BREW LATER function has not been previously set:
1.
After the appliance's digital clock has been set (see the "Setting the Digital
Clock" section), press the Brew Later Button. The light next to "BREW LATER"
on the display will illuminate and flash once per second.
2.
The clock on the display will show the previous Brew Later time that was
programmed. If a Brew Later time has never been set on the appliance or the
appliance has been unplugged since the last time the Brew Later time was
set, the Brew Later time defaults to 12:00 AM.
3.
While the Brew Later time on the display is blinking, use the HR and MIN
Buttons to program the Brew Later time.
4.
Press the Brew Later Button again to confirm the Brew Later time.
The time will also be confirmed if no buttons are pressed for 4 seconds.
5.
The appliance will begin brewing coffee at the programmed
Brew Later time.
If Brew Later function is already set:
6.
Press the Brew Later Button to check the Brew Later time. The clock will
flash once per second and display the Brew Later time for 4 seconds.
At this point, you may reset the Brew Later setting if desired.
7.
You can press the Brew Later Button to check the programmed Brew Later
time. The clock will flash once per second and display the programmed Brew
Later time for 4 seconds. While the clock is flashing, you can use the HR and
MIN Buttons to adjust the Brew Later time.
8.
To cancel the Brew Later function, press and hold the Brew Later Button for
3 seconds.
9.
After pressing no buttons for 4 seconds, the clock will revert
to the current time.
Note: Even when the Brew Later function is not being used, the Brew Later
time will still be stored unless the appliance is unplugged.
10
Advertisement
