TechniSat CE DIGICLOCK 2 User Manual page 6

Radioclock with led display
Table of Contents

Advertisement

Available languages

Available languages

Calling a program from the list of radio programs
- Press the MEMORY / TIME SET bu‫מּ‬on (5).
- Then use the HOUR / TUN- (6) or MINUTE / TUN+ (3) bu‫מּ‬ons to select the pro-
gram number and confirm the selection with the MEMORY / TIME SET bu‫מּ‬on (5).
Alarm se‫מּ‬ing
- To set the alarm, turn off the alarm clock by pressing the bu‫מּ‬on TURN OFF/ON
(2).
- Aﬞer switching off the device, press and hold AL.1 / VOL- (7) or AL.2 / VOL+ (4)
until the time se‫מּ‬ing flashes in the display.
- You can choose whether the device is to operate in mode during the alarm:
Radio or Buzzer mode. The LED with the buzzer symbol is an option with a buzzer.
The LED with a note symbol is an option with a radio. Press AL.1 / VOL- (7) or AL.2
/ VOL+ (4) to select the desired mode.
- If you have already selected the alarm mode you can now set the alarm time.
Press HOUR / TUN- (6) to set and MINUTE / TUN+ (3) to set the minutes.
- Press MEMORY / TIME SET (5) to save the alarm time.
Activation and deactivation of the alarm
- When the alarm clock is off, you can choose whether the device should operate
in mode during the alarm: Radio or Buzzer. LED with buzzer symbol is an option
with buzzer. The LED with a note symbol is an option with radio. Press AL.1 / VOL-
(7) or AL.2 / VOL+ (3) to select the desired mode.
- To deactivate the alarm, press the AL.1 / VOL- (7) or AL.2 / VOL+ (3) bu‫מּ‬on until
the red LED with the bell and note symbol disappears.
- When the alarm is activated, press the On/Off bu‫מּ‬on (2) to turn off the alarm.
Snooze function
- During the alarm, pressing the SNOZE/SLEEP/DIMMER bu‫מּ‬on (1) will switch off for
20 minutes.
- During the snooze, the LED next to the bell symbol and a note flashes.
- Aﬞer 20 minutes, the alarm will sound again.
- To turn off the alarm completely, press the On/Off bu‫מּ‬on (2), the LED at the
alarm type symbol will stop blinking.
Se‫מּ‬ing the shutdown timer
- The shutdown timer is set when the alarm clock is on.
- By pressing the SNOZE/SLEEP/DIMMER bu‫מּ‬on (1) you have the possibility to
change the time aﬞer which the device will automatically switch off.
- The following se‫מּ‬ings are available: 10, 20, 30, 40, 50, 60, 70, 80, 90 min and
OFF (timer off).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CE DIGICLOCK 2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents