Xiaomi Mi Smart Standing Fan 2 Pro User Manual page 9

Installation
Step 4: Install the front grille
Align the front grille alignment mark with the rear grille le alignment
11
mark, and make sure the front grille is properly embedded into the
rear grille. Turn the front grille clockwise until the front grille
13
alignment mark aligns the rear grille right alignment mark. Make sure
the grilles are securely fastened.
Rear Grille Le
Alignment Mark
Front Grille
Alignment Mark
Top View before
Fastening the
Front & Rear Grilles
11 13
Step 5: Fasten the front grille
Insert the 8 fan grille screw into
the hole at the bo om of the fan
grille. Turn the screw clockwise with
the included 7 hex key to tighten it.
Rear Grille Right
Alignment Mark
Front Grille
Alignment Mark
Top View a er Fastening the
Front & Rear Grilles
8
7
Step 6: Install the fan base
１
3
4
8
Standing fan mode: Connect
１
upper stand to the lower stand, and
3
then connect lower stand to the
base, as illustrated. Once you hear a click,
the parts have been installed successfully.
Table fan mode: Connect motor & upper
１
4
stand to the fan base. Once you hear a
click, the parts have been installed
successfully.
Note: Press the release bu on to remove
the lower stand.
motor &
4 fan