TFA VIEW METEO Instruction Manual page 20

6.2 Display illumination
The brightness can be adjusted to 5 different levels.
y
y With a simple press of the LIGHT button (Fig.2-G), you can choose between BACKLIGHT "OFF" (display illumination deactivated), and the
levels "1" (minimum brightness), "2", "3" and "4" (maximum brightness, default setting). The last selected level will remain permanently
active.
6.2.1 AutoDim function
If you wish, an automatic dimming function can be activated during night time.
y
The display illumination is then automatically switched to level 1 (minimum brightness) for the specified time slot.
y
Press and hold the LIGHT button for 3 seconds. AUTO DIM appears on the display and OFF (default) flashes. Press the "+" or "-" button
y
(Fig-2-D+E) to select ON.
Confirm the setting with the LIGHT button.
y
y The start time flashes (23:00 default). Use the "+" or "-" button to adjust the start time.
Confirm the setting with the LIGHT button.
y
The stop time flashes (6:00 default). Use the "+" or "-" button to adjust the stop time.
y
Confirm the setting with the LIGHT button.
y
If the AutoDim function has been activated, in the time area (Fig.1-D) (above the seconds) „AutoDim"
6.3 Description of the display areas
Some of the display areas of the VIEW METEO radio-controlled weather station cat.no. 35.8000.01 have the option of several different
functions. When there is an online connection, the standard function (without online connection) is either changed/extended or completely
replaced by another function.
6.3.1 Display area: weekday, time, date (Fig.1-D)
Standard function (without online connection)
y In the normal display, the day of the week, the current time and the date are shown here.
In the settings menu and with different history functions, information on the respective setting option or the selected measured value is
y
displayed in this area.
Information and status requests (see point 6.6 to point 6.9) are also displayed briefly in this area
y
With online connection / display area for stream info function
After a successful connection via the local network, a radio symbol "WIFI"
y
(above the seconds).
If you use the "Stream Info" function via the app, the selected additional weather information or personalised messages (up to 3 pieces of
y
information can be actively selected) are displayed in this area, alternating with the normal display every 5 seconds.
The day of the week, current time and date are only permanently displayed if no additional information/message is set for the device via the
app in "Stream Info".
is permanently displayed in the time area
20
is permanently shown in the display.