Advertisement
3.4 Touch panel settings
The Communication button is only for the service technician where he can check the Modbus
connection between unit and touch panel.
The Settings button will open a new page where you find the following possibilities:
1)
Touchscreen click. Activate this option when you want to hear a click sound when
touching the screen
2)
Touchscreen finger mode. Activate this option when you want to use your fingers instead
of a pen.
3)
Upside down mode. Here you can turn the screen by 180°.
Modbus Address. This setting should not be changed.
4)
Backlight Brightness – Operating/Standby. Here you can set the backlight for operation
5)
and standby mode.
3.5 Alarm page
If there is an alarm a red alarm icon will be shown on the start display. By touching the icon the
alarm page will open and you can see now which part of the unit has caused the alarm. In the
manual for the DanX unit you will find a guide how to solve the fault.
________________________________________________________________________________________________________
5
Advertisement
