Advertisement
2.0 Touch Panel setup
Take a pen and click on the Dantherm logo on the start screen and follow the instructions. This will
calibrate the screen.
3.0 Touch panel pages
There are four different kind of pages, the start/info pages, the set point pages, the alarm page and
the page for start/stop the unit.
3.1 Start page
1)
Touch button for screen calibration
2)
Actual room temperature
3)
Actual room relative humidity
4)
Touch button for Info pages
5)
Touch button for start/stop unit and info about the unit status
Unit stopped
Pool occupied (unit is running with outdoor air)
Pool unoccupied (unit is running in recirculation mode)
6)
Touch button for set point pages
________________________________________________________________________________________________________
2
3
4
5
3
1
6
Advertisement
