SEWOO SLK-T12EB User Manual
  1. Manuals
  2. Brands
  3. SEWOO Manuals
  4. Printer
  5. SLK-T12EB
  6. User manual

SEWOO SLK-T12EB User Manual

Hide thumbs Also See for SLK-T12EB:
Table of Contents

Advertisement

Quick Links

Download this manual
J. STEPHEN Lab., Ltd.
28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi-do , 447-210 Republic of Korea
TEL : +82-31-8077-5000 FAX : +82-31-459-8880
www.miniprinter.com
MODEL : SLK-T12EB
Receipt Printer User's Manual
All specifications are subject to change without notice
T12EB Rev. C 10/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLK-T12EB and is the answer not in the manual?

Questions and answers

Related Manuals for SEWOO SLK-T12EB

Summary of Contents for SEWOO SLK-T12EB

  • Page 1 J. STEPHEN Lab., Ltd. 28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi-do , 447-210 Republic of Korea TEL : +82-31-8077-5000 FAX : +82-31-459-8880 www.miniprinter.com MODEL : SLK-T12EB Receipt Printer User’s Manual All specifications are subject to change without notice T12EB Rev. C 10/16...

  • Page 3: Table Of Contents

    Table of Contents 1. Parts Identifications PRINTER COVER 1. Parts Identifications Open this cover to load or replace a paper. 2. Setting up the printer 2.1 Unpacking 2.2 Connecting the cables 2.3 Loading the roll paper 2.4 Adjustment of paper width CONTROL PANEL Features LED indicators 3.

  • Page 4: Setting Up The Printer

    2. Setting Up the Printer 2-1. Unpacking 2-2. Connecting the Cables Your printer box should include these items. If any items are damaged or missing, please contact your You can connect up the cables required for printing to the printer. They all connect to the connector panel on the back of the printer, which is shown below : dealer for assistance.
  • Page 5 2-2-1. Interface Connector Ethernet Interface SIGNAL Data Out + Output Data + Data Out - Output Data - Ground Data IN + Input Data + Data IN - Input Data - <9 Pin Serial> <USB “B” Type> This equipment is indoor use and all the communication wirings are limited to inside of the building. 2-2-2.

  • Page 6: Loading The Roll Paper

    2-3. Loading the Roll Paper 5. Note the correct direction that the paper comes off the roll: Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. ♣Turn off power switch.

  • Page 7: Adjustment Of Paper Width

    ♣CAUTION: 2-4. Adjustment of paper width When the paper cutter is jammed, the top cover might be stuck closed. In this case, repeat power on 1. Please adjust the Paper Guide to fit to the paper width as the direction of arrow. and off several times.

  • Page 8: Control Panel And Other Functions

    3. Control panel and other functions 4. Self Test The self-test result indicated whether the printer is operating properly. Also with this, user can check 3-1. Control panel following options or status of the printer. You can control the basic paper feeding operations of the printer with the button on the control panel. The indicator lights let you to monitor the printer’...

  • Page 9: Ascii Print

    5. ASCII Print 7. Hexadecimal Dump ASCII PRINT is printing a test page constructed ASCII code. You can able to check the printer works This feature allows experienced users to see exactly what data is coming to the printer. This can be properly with this useful in finding software problems.

  • Page 10: Printer Cleaning

    9. Specifications 8. Printer cleaning ♣Important! If the interior of the printer is dusty, printing quality can be lowered. When connecting or disconnecting the power supply from the printer, be sure that the In this case, follow the instructions below to clean the printer. following cautions are observed.

  • Page 11: Auto Cutter Specifications

    9-2. Auto Cutter Specifications (8) Overall dimension (1) Cutting Frequency Max. 30 cuts per minute (2) Thickness of paper 0.06 ~ 0.09 mm (3) Cutter Life 1.8 million cuttings (if the paper thickness is between 65 and 80µm) 9-3. Interface USB (B type) + Serial(RS-232C) + Ethernet 9-4.

  • Page 12: Environmental Requirements

    10. Command List -5. Environmental Requirements Command Function REMARKS (1) Operating Horizontal tab Temperature 0°C to 45°C Print and line feed Humidity 10% to 90% RH (without condensation) Print and carriage return Print and return to standard mode(in page mode) (2) Transport/Storage (except paper) Temperature -20°C to 60°C...
  • Page 13 Command Function REMARKS ESC t Select character code table ESC { Turn upside-down printing mode on/off FS p Print NV bit image FS q Define NV bit image GS ! Select character size GS $ Set absolute vertical print position in page mode GS * Define downloaded bit image GS /...

Table of Contents