Subscribe to Our Youtube Channel
Related Manuals for SEWOO SLK-TL100II
Summary of Contents for SEWOO SLK-TL100II
- Page 1 Aroot Co., Ltd. 28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea TEL : +82-31-8077-5000 / FAX : +82-31-624-5310 http://www.miniprinter.com TL100II KOR Rev. A 11/2023...
- Page 2 MODEL : SLK-TL100II Receipt Printer User’s Manual All specifications are subject to change without notice...
- Page 3 This device co mplies with part 15 of the FCC Rules. Operation is subject to the following two conditions. 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Tim Kloeker 19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA NA_Sales@miniprinter.com...
- Page 4 For USA Information to user; Caution: The user that changes or modifications not expressly approved by the Aroot Co., Ltd., responsible for compliance could void the user’s authority to oper- ate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 5 For Canada This class B digital apparatus complies with Canadian ICES-003 Cet appareil num rique de la class B est conforme la norme NMB-003 du Canada The antenna cannot be removed (and changed) by user. NOTE This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
- Page 6 Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
-
Page 7: Table Of Contents
Table of Contents 1. Parts Identifications 2. Setting up the printer 2.1 Unpacking 2.2 Connecting the cables 2.2.1 Interface Connector 2.2.2 Cash Drawer Connector 2.3. Loading the Roll Paper 3. Control panel and other functions 3.1 Control panel 3.2 Error Indicators 4. -
Page 8: Parts Identifications
1. Parts Identifications TOP COVER Open this cover to load or replace paper. CONTROL LABEL Features LED indicators to indicate printer status and switches to operate the printer. POWER SWITCH Used to turn on/off power to the printer INTERFACE CONNECTOR(SERIAL) INTERFACE PERIPHERAL DRIVE CONNECTOR(USB) -
Page 9: Setting Up The Printer
2. Setting Up the Printer 2.1. Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. The Printer Roll Paper Adaptor(Optional) Interface Cable(optional) -
Page 10: Connecting The Cables
2.2. Connecting the Cables You can connect up the cables required for printing to the printer. They all connect to the connector panel on the back of the printer, which is shown below : INTERFACE CONNECTOR(SERIAL) For connection to a host computer. -
Page 11: Interface Connector
2.2.1. Interface Connector 9 Pin Serial Serial Interface SIGNAL DESCRIPTION Input Printer transmit data line RS-232C level Output Printer receive data line RS-232C level 4, 7 Output Printer handshake to host line RS-232C level System Ground Input Data Send Ready 1, 8, 9 USB “B”... -
Page 12: Cash Drawer Connector
2.2.2. Cash Drawer Connector The printer can operate two cash drawers with a 6 pin RJ-11 modular connector. The driver is capable of supplying a maximum current of 0.1A for 510ms or less when not printing. SIGNAL Description Signal GND Drawer kick-out drive signal 1 Output Drawer open/close signal... -
Page 13: Loading The Roll Paper
2.3. Loading the Roll Paper • NOTE: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly.(Turn off power switch) 1 Make sure that the printer is not receiving data;... - Page 14 5 Be sure to note the correct direction that the paper comes off the roll. 6 Pull out a small amount of paper, as shown. Then, close the cover. 7 Tear off the paper as shown.
- Page 15 CAUTION: When the paper is jammed from cutter, the top cover might be stuck as well. In this case, repeat power on and off several times. If the top cover is still stuck, please follow the steps to release the papers from jamming. 1 Make sure the printer is turned off.
-
Page 16: Control Panel And Other Functions
3. Control panel and other functions 3.1. Control panel You can control the basic paper feeding operations of the printer with the button on the control panel. The indicator lights help you to monitor the printer’s status. Control Panel Button The button can be disabled by the ESC c 5 command. -
Page 17: Self Test
4. Self Test The self-test result indicated whether the printer is operating properly. Also with this, user can check following options or status of the printer. Control circuit Printer mechanism Printing quality ROM version Interface setting This test is independent of any other equipment or software. Running the self test 1 Make sure the printer is turned off and the printer cover is closed properly before performing the self test. -
Page 18: Ascii Print
5. ASCII Print ASCII PRINT is printing a test page constructed ASCII code. You can able to check the printer works properly with this The ASCII PRINT test automatically ends and cuts the paper after printing the following: *** Completed *** The printer is ready to receive data as soon as it completes the ASCII PRINT. -
Page 19: Hexadecimal Dump
7. Hexadecimal Dump This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems. When you go into the Hexa Dump function, the printer prints all commands and other data in hexadecimal format along with a guide section to help you find specific commands. -
Page 20: Peripherals Connection
8. Peripherals Connection This product can communicate with other devices via Bluetooth or Wi-Fi communica- tion and cable. 9-1. Bluetooth Connection Optional 1 The Printer can be connected to devices equipped with Bluetooth communication capacity(PDAs, PCs, etc.) 2 Use the Bluetooth connection function supported by the device to connect to the printer. -
Page 21: Printer Cleaning
9. Printer cleaning If the interior of the printer is dusty, printing quality can lowered. In such a case, follow the instructions below to clean up the printer. ※ NOTE: 1 Make sure to turn the printer power off prior to cleaning 2 Regarding print head cleaning, as the print head is very hot during printing, turn off the printer power and wait approximately 10 minute before start. -
Page 22: Specifications
10. Specifications Printing Method Direct Thermal Printing Speed Max. 220 mm/sec Resolution 180 DPI Dot Pitch 0.141mm x 0.141mm Printing Width Max. 72mm Number of print columns Font A - 42 columns / Font B - 56 columns EAN-8, EAN-13, Code 39, Code 93, Code 128,ITF, UPC-A, UPC-E, Codabar Barcode PDF 417, QR code, DATA MATRIX... - Page 23 Cash drawer 1 circuits(24V, 1A Max.) MCBF 60 million lines Reliability TPH Life 160Km Type Guillotine Cutter Life 1,500,000 cuts Paper Thickness 0.06 ~ 0.09mm 100 ~ 240Vac 50/60 Hz Power 24Vdc / 1.75A Size 136 x 165 x 111 [W x D x H (mm)] Weight 0.6kg Operation...
- Page 24 Overall dimension 165 mm 164.34...
-
Page 25: Command List
11. Command List Command Function REMARKS Horizontal tab Print and line feed Print and carriage return Print and return to standard mode(in page mode) Cancel print data in page mode DLE EOT Real-time status transmission DLE ENQ Real-time request to printer DLE DC4 Generate pulse at real-time ESC FF... - Page 26 Command Function REMARKS ESC d Print and feed paper n lines ESC p General pulse ESC t Select character code table ESC { Turn upside-down printing mode on/off FS p Print NV bit image FS q Define NV bit image GS ! Select character size GS $...
-
Page 27: Utilities
Printer F/W and Font Download are available, and BT, Wi-Fi module F/W Download is supported as an option. (F/W) It is a utility app that prints text, barcodes, images, etc. Android Utility through Bluetooth and Wi-Fi communication, and able (Sewoo M_Utility) to printer settings. -
Page 28: S/W
Mac Driver the Mac OS environment. Android Plugin This is a print service plug-in that allows you to print (Sewoo Print Ser- documents, images, and web pages without installing vice Plugin) additional apps. This is library for communication and data output with Windows SDK Thermal printer in Windows OS.
Need help?
Do you have a question about the SLK-TL100II and is the answer not in the manual?
Questions and answers