Panasonic Jetwriter KX-P7305 User Manual page 236

Settings and Printing
[B] Using NDS - RPRINTER (NPRINTER) mode
The following are the steps to set up the printer. First install the Network Setup Tool by using
the printer CD-ROM disk and then set up the printer.
1
Start the server system.
2
Start the client system and log on the network in the NDS mode.
• If the Network Setup Tool is already installed, click [Start], move the pointer to
Programs or All Programs, Panasonic and Panasonic KX-P7305 and KX-P7310,
then click Network Setup Tool. Proceed to step 7.
3
Insert the printer CD-ROM disk into the CD-ROM drive.
The CD-ROM launches automatically.
NOTE
• If the CD-ROM does not launch automatically, perform the following steps.
(1) Double click My computer icon (Windows XP / Windows Server 2003: Start - My
Computer).
(2) Double click the CD-ROM icon.
4
(Click language and) click KX-P7310.
5
Click Install Network Utilites.
6
Follow the instructions until the screen below is displayed.
Maintenance and Spec. Network
Network
Setup in NetWare
53