Settings and Printing
USB (Universal Serial Bus) Interface
Cable: It is recommended to use a cable 2 m (6.6 feet) or less in length.
Pin configuration
Signal pin
1
2
3
4
USB Interface connector (printer side)
NOTE
• Be sure to use a high- / full-speed shielded cable (12 Mbps or 480 Mbps) which the Data +
and Data – cables are the twisted pair.
• When using the printer and other USB devices simultaneously, we cannot guarantee normal
printing.
• Be sure to use a High-Speed USB 2.0 certified cable if your computer is equipped with the
Hi-Speed USB 2.0 interface.
• Do not connect the USB cable to the front connector of the computer or keyboard connector
of the iMac.
Maintenance and Spec.
Maintenance and Spec.
Signal
V
BUS
-Data
+ Data
Ground
2
3
Network
1
4
61
Specifications