HL-WALL-06
Solar Lamp
USER MANUAL
Parts Identication
1
2
3
4
5
Lampshade
1
PIR
2
Infrared Receiver
3
Switch and Indicator
4
Solar Panel
5
Special Features:
Polycrystalline Solar Panel
Li-ion Rechargeable Battery
Congurable Operation Modes
Equipped With PIR Sensor
Material: Aluminum Alloy & PC
HL-WALL-06 - TECHNICAL SPECIFICATIONS / ESPECIFICACIONES TECNICAS
Luminosity / Luminosidad (LM)
SOLAR PANEL / PANEL SOLAR
Type & Capacity / Tipo y Capacidad
Li-Ion BATTERY / BATERIA Li-Ion
Capacity / Capacidad
Charge & Discharge Temperature /
Temperatura de Carga y Descarga
Recharge Time / Tiempo de Recarga
ILLUMINATION / ILUMINACION
LED (OSRAM)
Light Color Temperature / Temperatura de Color de la Luz
Efciency / Eciencia
OPERATION / OPERACION
Backup (During cloudy days) / Autonomía (con Poca Luz Solar)
Operation Modes / Modos de Operación
Mode Indication / Indicación de Modo
Capacity Indication / Indicador de Capacidad
PIR
IP/IK Codes / Códigos IP/IK
Directives / Normativas
Installation Height / Altura de Instalación
2000
lumens
WARNING
1. Keep the device away from re and re risk
2. There are no replaceable parts inside the lamp. If disassembled warranty will be void.
3. Do not remove battery for other use. If backup time is too short, lamp's battery needs to be recharged under bright sunlight
4. Clean solar panel regularly for more efcient operation and longer backup (Suggestion: At least every 6 months)
5. Long term storage might cause battery damage and leakage, Leakage might cause battery spontaneous combustion
6. Operation temperature for this lamp must comply with Technical Specications
Installation Instructions
Fix the lamp to the wall with the screw
Wall
Rear
View
Solar Panel must be oriented toward sun for battery
charging efciency
IMPORTANT
1. Use standard installation accessories
2. If stored, charge the lamp every 3 months, to avoid
battery damage
3. If stored for more than 1 year without charging, make a
charge & discharge process to assure battery is in good
condition, otherwise it is not allowed to use.
Mode 3: 200LMx5H + 40LM+PIR Untill Dawn/Hasta amanecer
Mode 1: Red/Rojo - Mode 2: Green/Verde - Mode 3: Orange/Naranja
CE (IEC60598-1 / IEC60598-2-3 / EN55015 / EN61547)
Operation Instructions
Power On/Off: Press switch for 1.5 Sec, approx.
Mode Change: Press switch shortly to choose
Mode 1, Mode 2, or Mode 3.
4.50
Available Modes:
Mode 1
Mode 2 (Green):
Mode 3 (Orange):
Select Operation Mode according to your own requirements
Battery Power Indication:
Green:
> 70%
Orange:
Red:
< 30%
Note: LED Indicator regularly shows Battery Capacity. When
changing Operation Mode it shows selected mode for 5 Sec,
then it returns to show Battery Capacity
T Button on Remote Control
Short press once for 100% bright for 10 min
Short press twice for 100% bright for 20 min
After selected time, lamp will go back to
previous mode.
2000
Polycrystalline / Policristalino, 2W
3.7 Vdc / 19.24 WH / 2.600 mAH
0 to 45 °C / -20 to 60 °C
13 H
2835 - 40pcs
3000K, Ra 80+
190 lm/W
Up to 10 nights / Hasta 10 noches
Mode 1: 60LM + PIR 2000LMx10s
Mode 2: 120LM + PIR 2000LMx10s
Green / Verde: >70%
Orange / Naranja: 70% to / a 30%
Red / Rojo: <30%
120º, >5m
IP65 / IK10
2.5m to/a 3.5m
(Red):
60LM + PIR 2000LM x 10s
120LM + PIR 2000LM x 10s
200LMx5H + 40LMx7H / PIR 2000LMx10s
Between 30% and 70%
www.xmart-ups.com
Need help?
Do you have a question about the HL-WALL-06 and is the answer not in the manual?
Questions and answers