Xmart lux HL-WALL-20 User Manual

HL-WALL-20 / HL-WALL-40
Solar Lamp
USER MANUAL
Parts Identication
2 3
1
Led Panel
1
Indicator Light
2
Switch
3
Bracket
4
Solar Panel
5
Special Features:
Monocrystalline Solar Panel
Li-ion Rechargeable Battery
Congurable Operation Modes
Material: Aluminum Alloy & PC
TECHNICAL SPECIFICATIONS / ESPECIFICACIONES TECNICAS
MODEL / MODELO
Luminosity / Luminosidad (LM)
SOLAR PANEL / PANEL SOLAR
Type / Tipo
Capacity / Capacidad
Li-Ion BATTERY / BATERIA Li-Ion
Capacity / Capacidad
Charge & Discharge Temperature /
Temperatura de Carga y Descarga
Recharge Time / Tiempo de Recarga
ILLUMINATION / ILUMINACION
LED (OSRAM)
Light Color Temperature / Temperatura de Color de la Luz
Efciency / Eciencia
OPERATION / OPERACION
Backup (During cloudy days) / Autonomía (con Poca Luz Solar)
Operation Modes / Modos de Operación
Mode Indication / Indicación de Modo
Capacity Indication / Indicador de Capacidad
IP Code / Código IP
Directives / Normativas
Installation Height / Altura de Instalación
3K & 6K
lumens
WARNING
1. Keep the device away from re and re risk
2. There are no replaceable parts inside the lamp. If disassembled warranty will be void.
3. Do not remove battery for other use. If backup time is too short, lamp's battery needs to be recharged under bright sunlight
4. Clean solar panel regularly for more efcient operation and longer backup (Suggestion: At least every 6 months)
5. Long term storage might cause battery damage and leakage, Leakage might cause battery spontaneous combustion
6. Operation temperature for this lamp must comply with Technical Specications
Installation Instructions
Fix Solar Panel Bracket to the wall:
1 D1 (10W/5W): F
L1 (10W/5W): 100 mm
4
Screw Solar Panel to Bracket:
2
Screw Lamp Bracket to the wall
3
Connect Lamp and Solar Panel cables
4
Solar Panel must be oriented toward sun for battery
charging efciency
IMPORTANT
1. Use standard installation accessories
2. If stored, charge the lamp every 3 months, to avoid
battery damage
3. If stored for more than 1 year without charging, make a
charge & discharge process to assure battery is in good
condition, otherwise it is not allowed to use.
3.7V / 28.86WH / 2.600 mAH
Mode 1: Red - Mode 2: Green - Mode 3: Orange - T: Green Flashing
Modo 1: Rojo - Modo 2: Verde - Modo 3: Naranja - T: Verde Intermitente
6.5 mm
HL-WALL-20 HL-WALL-40
3000
Monocrystalline / Monocristralino
14V / 5W
3.7V / 57.72WH / 2.600 mAH
Charge / Carga: 0 to/a 45 °C
Discharge / Descarga: -20 to/a 60 °C
7.5 H
3030 - 30 pcs
5700K, Ra 80+
190 lm/W
Up to 10 nights / Hasta 10 noches
Mode 1: 50% x 5h+10% Until Dawn / Hasta amanecer
Mode 2: 30% x 5h + 10% Until Dawn / Hasta amanecer
Mode 3: 20% Until Dawn / Hasta amanecer
T: 100% x 1h or 2h (Remotely Adjustable/Ajustable con control)
Green / Verde: >70%
Orange / Naranja: 70% to / a 30%
Red / Rojo: <30%
IP65
CE (IEC60598-1 / IEC60598-2-3 / EN55015 / EN61547)
2m to/a 4m
Operation Instructions
Power On/Off: Press switch for 1.5 Sec, approx.
Mode Change: Press switch shortly to choose Mode 1, Mode
2, or Mode 3.
Available Modes:
Mode 1 (Red): 50% x 5H + 10% Until dawn
Mode 2 (Green): 30% x 5H + 10% Until dawn
Mode 3 (Orange): 20% Until dawn
T Mode (Green Flasing): See note below
Select Operation Mode according to your own requirements
Battery Power Indication:
Green: > 70%
Orange: Between 30% and 70%
Red: < 30%
Note: Indicator LED regularly shows Battery Capacity. When
changing Operation Mode it shows selected mode for 5 Sec,
then it returns to show Battery Capacity
T Button on Remote Control
Short press once for 100% bright for 1 hour
Short press twice for 100% bright for 2 hours
After selected time, lamp will go back to
previous mode.
www.xmart-ups.com
6000
14V / 10W
4m to/a 6m