HL-WALL-12
Solar Lamp
USER MANUAL
Parts Identication
Solar Panel
1
Switch
2
PIR
3
Lampshade
4
Special Features:
Polycrystalline Solar Panel
Li-ion Rechargeable Battery
Equipped With PIR Sensor
Congurable Operation Modes
Multi-angle Adjustable
Multiple Installation Possibilities
ABS & PC Case
Compact Design, High Brightness
HL-WALL-12 - TECHNICAL SPECIFICATIONS / ESPECIFICACIONES TECNICAS
Luminosity / Luminosidad (LM)
SOLAR PANEL / PANEL SOLAR
Type & Capacity / Tipo y Capacidad
Li-Ion BATTERY / BATERIA Li-Ion
Capacity / Capacidad
Charge & Discharge Temperature /
Temperatura de Carga y Descarga
Recharge Time / Tiempo de Recarga
ILLUMINATION / ILUMINACION
LED (OSRAM)
Light Color Temperature / Temperatura de Color de la Luz
Efciency / Eciencia
OPERATION / OPERACION
Backup (During cloudy days) / Autonomía (con Poca Luz Solar)
Operation Modes / Modos de Operación
Mode Indication / Indicación de Modo
Capacity Indication / Indicador de Capacidad
PIR
IP/IK Codes / Códigos IP/IK
Directives / Normativas
Installation Height / Altura de Instalación
2000
lumens
WARNING
1. Keep the device away from re and re risk
2. There are no replaceable parts inside the lamp. If disassembled warranty will be void.
3. Do not remove battery for other use. If backup time is too short, lamp's battery needs to be recharged under bright sunlight
4. Clean solar panel regularly for more efcient operation and longer backup (Suggestion: At least every 6 months)
5. Long term storage might cause battery damage and leakage, Leakage might cause battery spontaneous combustion
6. Operation temperature for this lamp must comply with Technical Specications
Installation Instructions
Fix the lamp to the wall with screws
1
2
3
4
Solar Panel must be oriented toward sun for battery
charging efciency
Give lighting proper orientation by Vertical Sliding
and/or Horizontally Moving
IMPORTANT
1. Use standard installation accessories
2. If stored, charge the lamp every 3 months, to avoid
battery damage
3. If stored for more than 1 year without charging, make a
charge & discharge process to assure battery is in good
condition, otherwise it is not allowed to use.
2000
Monocrystalline / Monocristalino, 1W
3.7 Vdc / 14.8 WH / 2.000 mAH
Charge / Carga: 0 to/a 45 °C
Discharge / Descarga: -20 to/a 60 °C
20 H
2835 - 39pcs
4000K, Ra 80+
190 lm/W
Up to 10 nights / Hasta 10 noches
Mode 1: 50LM + PIR 2000LM
Mode 2: 0LM + PIR 2000LM
Mode 3: 50LM until Dawn (Hasta amanecer)
Mode 1: 1 Flash - Mode 2: 2 Flashes - Mode 3: 3 Flashes
Modo 1: 1 Destello - Modo 2: 2 Destellos - Modo 3: 3 Destellos
N/A
120º, >5m
IP65 / IK10
CE (IEC60598-1 / IEC60598-2-3 / EN55015 / EN61547)
3 m
Operation Instructions
Power On/Off: Press switch for 1.5 Sec, approx.
Mode Change: Press switch shortly to choose Mode 1,
Mode 2, or Mode 3.
Indicator LED will ash once when selecting Mode 1,
twice when selecting Mode 2, and 3 times when
selecting Mode 3
Available Modes:
Mode 1 50LM + PIR 1000LM x 10s
:
Mode 2:
0LM + PIR 1000LM x 10s
Mode 3:
50LM Until Dawn
Select Operation Mode according to your own
requirements
Operation Mode Indicator:
Mode 1: 1 Flash
Mode 2: 2 Flashes
Mode 3: 3 Flashes
www.xmart-ups.com
Need help?
Do you have a question about the HL-WALL-12 and is the answer not in the manual?
Questions and answers