HL-BASE-07
Solar Lamp
USER MANUAL
Parts Identication
1
2
3
5
Solar Panel
1
Led Panel
2
Screw
3
Switch
4
Indicator Light
5
Special Features:
Polycrystalline Solar Panel
Li-ion Rechargeable Battery
Congurable Operation Modes
Material: Aluminum Alloy & PC
HL-BASE-07 - TECHNICAL SPECIFICATIONS / ESPECIFICACIONES TECNICAS
Luminosity / Luminosidad (LM)
SOLAR PANEL / PANEL SOLAR
Type & Capacity / Tipo y Capacidad
Li-Ion BATTERY / BATERIA Li-Ion
Capacity / Capacidad
Charge & Discharge Temperature /
Temperatura de Carga y Descarga
Recharge Time / Tiempo de Recarga
ILLUMINATION / ILUMINACION
LED (OSRAM)
Light Color Temperature / Temperatura de Color de la Luz
Efciency / Eciencia
OPERATION / OPERACION
Backup (During cloudy days) / Autonomía (con Poca Luz Solar)
Operation Modes / Modos de Operación
Mode Indication / Indicación de Modo
Capacity Indication / Indicador de Capacidad
PIR
IP/IK Codes / Códigos IP/IK
Directives / Normativas
Installation Height / Altura de Instalación
100
lumens
WARNING
1. Keep the device away from re and re risk
2. There are no replaceable parts inside the lamp. If disassembled warranty will be void.
3. Do not remove battery for other use. If backup time is too short, lamp's battery needs to be recharged under bright sunlight
4. Clean solar panel regularly for more efcient operation and longer backup (Suggestion: At least every 6 months)
5. Long term storage might cause battery damage and leakage, Leakage might cause battery spontaneous combustion
6. Operation temperature for this lamp must comply with Technical Specications
Installation Instructions
Screw the lamp base to the ground, making sure to
have proper stability.
4
Solar Panel must be oriented toward sun for battery
charging efciency
IMPORTANT
1. Use standard installation accessories
2. If stored, charge the lamp every 3 months, to avoid
battery damage
3. If stored for more than 1 year without charging, make a
charge & discharge process to assure battery is in good
condition, otherwise it is not allowed to use.
100
Polycrystalline / Policristalino, 0.6W
3.7 Vdc / 2.96 WH / 800 mAH
Charge / Carga: 0 to/a 45 °C
Discharge / Descarga: -20 to/a 60 °C
6 H
2835 - 04pcs
3000K, Ra 80+
190 lm/W
Up to 10 nights / Hasta 10 noches
Mode 1: 50 LM / Mode 2: 20 LM
Mode 1: 1 Flash - Mode 2: 2 Flashes
Modo 1: 1 Destello - Modo 2: 2 Destellos
Green / Verde: >70%
Orange / Naranja: 70% to / a 30%
Red / Rojo: <30%
N/A
IP65 / IK10
CE (IEC60598-1 / IEC60598-2-3 / EN55015 / EN61547)
Ground level / A nivel del suelo
Operation Instructions
Power On/Off: Press switch for 1.5 Sec, approx.
Mode Change: Press switch shortly to choose Mode
1 or Mode 2.
Available Modes:
Mode 1: Red Indicator 1 Flash
100 LMx2H + 80LMx1H + 60LMx1H + 40x1H + 20 LM
Mode 2: Red Indicator 2 Flashes
50 LM Until dawn
Select Operation Mode according to your own
requirements
Battery Power Indication:
Green:
> 70%
Orange:
Between 30% and 70%
Red:
< 30%
Note: Indicator LED regularly shows Battery Capacity. When
changing Operation Mode it shows selected mode for 5 Sec,
then it returns to show Battery Capacity
www.xmart-ups.com
Need help?
Do you have a question about the HL-BASE-07 and is the answer not in the manual?
Questions and answers