Table of Contents
Advertisement
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.
Listings and Code Approvals...............................................................................................................................3
Description of the Fireplace System....................................................................................................................3
Fireplace System Components............................................................................................................................4
Pre-Installation Preparation .................................................................................................................................8
Fireplace Locations and Space Requirements..............................................................................................8
Framing The Fireplace..................................................................................................................................9
Hearth Extensions.......................................................................................................................................10
Sidewalls/Surrounds....................................................................................................................................11
Mantel..........................................................................................................................................................11
Chimney Requirements .....................................................................................................................................11
Using Offsets and Returns..........................................................................................................................12
Chimney Height Requirements...................................................................................................................13
Step-By-Step Installation of the Fireplace System.............................................................................................14
Constructing a Chase ........................................................................................................................................19
Materials For The Chase.............................................................................................................................19
Installing a Terminal Cap on a Chase-Enclosed Chimney..........................................................................20
Operating Instructions........................................................................................................................................21
Safety Precautions
1. Please read these installation instructions com-
pletely before beginning installation procedures.
Failure to follow them could cause a fireplace
malfunction resulting in serious injury and/or prop-
erty damage.
2. Always check your local building Codes prior to
installation. The installation must comply with all
local, regional, state and national Codes and reg-
ulations.
3. An adequate supply of replacement combustion
air from outside the house must be available to
the fire for the fireplace to operate properly. To
achieve this, the use of the optional Outside Air
Kit is highly recommended.
In the event the home is unusually tight, the
optional combustion air kit may not provide all the
air required to support combustion. Heat-n-glo is
not responsible for any smoking or related prob-
lems that may result from the lack of adequate
combustion air. It is the responsibility of the
builder/contractor to ensure that adequate com-
bustion air has been provided for the fireplace.
4. The EM Series woodburning fireplace must be
installed with the Hearth Technologies Inc. (HTI)
SL300 Series chimney system.
4-99
EM SERIES WOODBURNING FIREPLACE
Table of Contents
The chimney system must always terminate out-
side the building. Be sure to follow all chimney
specifications given in these installation instruc-
tions.
5. NEVER leave children unattended when there is
a fire burning in the fireplace.
6. This fireplace is built for solid fuel only. DO NOT
use chimney cleaners or flame colorants in your
fireplace.
7. NEVER use gasoline, gasoline type lantern fuel,
kerosene, charcoal lighter fluid, or similar liquids
in this fireplace. Keep any flammable liquids a
safe distance from the fireplace.
8. The flue damper must be open at all times when
the fireplace is in use.
9. While servicing this fireplace, always shut off any
electricity or gas to the fireplace. This will prevent
possible electrical shock or burns. Also, make
sure the unit is completely cooled before servicing.
10. To ensure a safe fireplace system and to prevent
the buildup of soot and creosote, inspect and
clean the fireplace and chimney prior to use and
periodically during the burning season.
2
31316A
Advertisement
Table of Contents
