Operation Manual (For Soliton) – Mirroring
H3C S3100 Series Ethernet Switches
1.2 Mirroring Configuration
Table 1-2 Mirroring configuration tasks
Configuring Local Port Mirroring
Configuring Remote Port Mirroring
1.2.1 Configuring Local Port Mirroring
I. Configuration prerequisites
The source port is determined and the direction in which the packets are to be
mirrored is determined.
The destination port is determined.
II. Configuration procedure
Table 1-3 Configure local port mirroring
Enter system view
Create a port mirroring group
Configure the
source port for the
port mirroring group
Configure the
destination port for
the port mirroring
group
When configuring local port mirroring, note that:
Task
Operation
In system
view
In port view
In system
view
In port view
Chapter 1 Mirroring Configuration
Optional
Optional
Command
system-view
mirroring-group
group-id local
mirroring-group
group-id mirroring-port
mirroring-port-list { both
| inbound | outbound }
interface interface-type
interface-number
mirroring-group
group-id mirroring-port
{ both | inbound |
outbound }
quit
mirroring-group
group-id monitor-port
monitor-port-id
interface interface-type
interface-number
mirroring-group
group-id monitor-port
1-4
Remarks
Description
—
Required
Use either
approach
You can configure
multiple source
ports at a time in
system view, or
you can configure
the source port in
specific port view.
The configurations
in the two views
have the same
effect.
Use either
approach
The configurations
in the two views
have the same
effect.