Operating and Maintenance Instructions
Controller connection for fans with current consumption greater than 1.0A or for an array of fans
7.0 Connections
Screw Terminal Block
3-way
6-way
210-OMI13848_Iss5.docx
Figure 4 - Wiring diagram above 1 A total load
Designation
0
0-10
10
Lo
M
Hi
N
N
L
Table 2 - Connections
ORIGINAL INSTRUCTIONS
ebm-papst UK Ltd
Chelmsford Business Park Chelmsford Essex CM2 5EZ
Telephone: +44(0)1245468555 Fax: +44(0)1245466336
e-mail
sales@uk.ebmpapst.com
Connection
Fan Control GND (Blue Wire)
Fan signal wire (Yellow Wire)
+10V output (Red Wire)
Switched live to activate Low speed potentiometer
Switched live to activate Medium speed potentiometer
Switched live to activate High speed potentiometer
Mains Neutral
Fan Neutral (If used)
Fan Live (Below 1.0A!)
19/07/2022 09:04:36
Page 5 of 7