Siemens VS07G1466 Instruction Manual page 15

Changing the dust bag
*
*
*
*
CLICK!
Replacing the exhaust filter
You must replace the exhaust filter in your vacuum
cleaner once a year.
Replacing the micro active carbon filter
Open the dust bag compartment lid.
Release the filter holder by moving the locking
lever in the direction of the arrow.
Remove the micro active carbon filter.
Insert the new micro active carbon filter into the
vacuum cleaner and clip into place.
Replacing the HEPA filter
If your vacuum cleaner is equipped with a HEPA
filter, this should be replaced once a year.
Open the dust bag compartment lid.
Unlock the HEPA filter by pushing the locking tab
in the direction of the arrow and remove it from
the vacuum cleaner.
Insert the new HEPA filter and clip in place.
If you have used the vacuum cleaner to vacuum
up fine dust particles, clean the motor protection
filter by tapping out the dirt and, if necessary,
replace the HEPA filter.
* dependent on model
en
17