Panasonic AG-VP310 Operating Instructions Manual page 33

*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
ACTION
SELECT
SET
DISPLAY
Weak Signal Display Feature
When "ON," picture is displayed regardless of signal
strength.
1
Press ACTION
to display MENU.
2
MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH:3
SELECT : SET : SET
EXIT : ACTION
3
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK S I GNAL D I SPLAY:OFF
SELECT : SET: SET
EXIT : ACT I ON
• ON: Picture is displayed regardless of signal
condition, and may not always be clearly visible.
OFF: Screen turns solid blue when signal is weak or
non-existent.
• Selecting ON has no effect on connected equipment
with blue back feature.
4
Press ACTION
to return to normal screen.
Auto Shut-Off Feature
The power shuts off at a preset time.
1
Press ACTION
to display MENU.
2
MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH:3
SELECT : SET : SET
EXIT : ACTION
3
SET UP VCR
REPEAT PLAY : OFF
REMOTE WARN I NG : ON
AUTO SHUT - OFF : OFF
FRONT DISPLAY : ON
AUTO VCR/TV : ON
TAPE SELECT : T-120
SELECT : SET : SET
END : ACT I ON
4
Press ACTION
to return to normal screen.
Note
• The shut-off countdown will not function during Play or
Record.
Press
to select "SET UP
CHANNEL," and
press SET.
Press
to select "WEAK SIGNAL
DISPLAY," and
press SET
to set "ON" or "OFF."
Press
to select "SET UP VCR," and
press SET.
Press
to select "AUTO SHUT-OFF."
Press SET repeatedly to
change shut-off time as
shown below.
2 Hours
OFF
6 Hours
4 Hours
33