Repeat Play; Auto Play; Auto Rewind - Panasonic AG-VP310 Operating Instructions Manual

*Important: If a remote control button does not work when pressed,
Tape Select
Select your tape length so the tape position
and amount of tape remaining are properly
displayed.
(See "Tape Position Display" section right.)
1
Press ACTION
to display MENU.
2
MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH:3
SELECT : SET : SET
EXIT : ACTION
3
SET UP VCR

REPEAT PLAY

: OFF
REMOTE WARN I NG : ON
AUTO SHUT - OFF
: OFF
FRONT DISPLAY : ON
AUTO VCR/TV : ON
TAPE SELECT : T-120
SELECT : SET : SET
END : ACT I ON
• Select "T-120" for tapes 120 minutes or
less, "T-160" if 140 or 160 minutes, and
"T-180" if 180 minutes.
4
Press ACTION
to return to normal screen.
Repeat Play
Set to playback a recording over and over.
1
Press ACTION
to display MENU.
2
MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH:3
SELECT : SET : SET
EXIT : ACTION
3
SET UP VCR
REPEAT REPEAT PLAY : OFF
REMOTE WARN I NG : ON
AUTO SHUT - OFF
: OFF
FRONT DISPLAY : ON
AUTO VCR/TV : ON
TAPE SELECT : T-120
SELECT : SET : SET
END : ACT I ON
• Play repeats at tape end or if unrecorded
portion over 30 sec. is detected.
4 Press ACTION
to return to normal screen.
Note
• For repeat play in DVD mode, see page 47.
press the VCR button on the remote and try the button again.
Press to select
"SET UP VCR," and
press SET.
Press to select
"TAPE SELECT,"
and press SET to
set "T-120," "T-160"
or "T-180."
T-120 T-160 T-180
Press
to select "SET UP
VCR," and press
SET.
Press
to select "REPEAT
PLAY," and press
SET to set "ON" or
"OFF."
Tape Position Display
To find out the present tape position and
amount of tape remaining.
Tape position is displayed incorrectly
in the following cases:
• If VHS-C type cassettes, tapes under 30
minutes, tapes over 180 minutes, or
incompatible tapes are used.
• If the correct tape length is not selected.
(See "Tape Select" section left.)
1 Press TAPE POSITION
to detect current tape position.
DETECTING TAPE POSITION
SP
R 120 M I N.
BEG I N END
2
Press TAPE POSITION
(or wait 5 seconds) to return to
normal screen.
Auto Operation Functions

Auto Play

Insert a tape ➛ Power comes on,
➛ Play starts if there is no record tab
(see p. 6).

Auto Rewind

Play
➛ Tape end ➛ Rewind
Fast Forward
Play Auto Eject
(Repeat Play must be off)
➛ ➛ ➛ ➛ ➛ ➛ ➛ ➛ ➛ ➛
Play Tape end
➛ ➛ ➛ ➛ ➛
Tape ejects if some programs are set.
• "DETECTING TAPE
POSITION" only
appears the first time a
cassette is inserted
and it takes several
seconds for correct
indication to appear.
• The present tape
position indication and
amount of tape
remaining (according to
tape speed) are
displayed.
Tape remaining time
display may not be
precise.
➛ ➛ ➛ ➛ ➛
➛ ➛ ➛ ➛ ➛
Rewind Stop
Stop
31