11
Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
12
Press
.
F9
At the confirmation message, select [Yes] and then press Enter.
The Setup Utility settings excluding the password(s) will return to the default values.
13
Press
.
F10
At the confirmation message, select [Yes] and press Enter.
The Setup Utility will close, and the computer will restart.
14
Perform the first-time operation (
15
Start the Setup Utility and change the settings as necessary.
16
Perform Windows Update.
while [Panasonic] boot screen is displayed.
F2
page 13).
25