Panasonic Toughbook CF-U1A1B1G2M Operating Instructions Manual page 40

Troubleshooting (Basic)
Starting Up
The date and time
are incorrect.
[Executing Battery
Recalibration]
screen appears.
[Enter Password]
does not appear
when resuming from
sleep
( ) /
standby
(
hibernation.
40
Make the correct settings.
Click
and Region] - [Date and Time].
Click [start] - [Control Panel] - [Date, Time, Language,
and Regional Options] - [Date and Time].
If the problem persists, the internal clock battery may
need to be replaced. Contact Panasonic Technical
Support (
When the computer is connected to LAN, check the
date and time of the server.
The 2100 A.D. or later year will not be correctly recog-
nized on this computer.
The Battery Recalibration was canceled before Win-
dows was shut down last time. To start up Windows,
turn off the computer by the power switch, and then
turn on.
The password you have set in the Setup Utility is not
requested at resuming. To use the password security at
resuming, set the Windows password.
A Click
and Family Safety] - [Add or remove user accounts]
and select the account, and set the password.
) or
B Click
Security] - [Power Option] - [Require a password
when the computer wakes] and add a check mark
for [Require a password].
Set the Windows password. The password you have
set in the Setup Utility is not requested at resuming.
A Click [start] - [Control Panel] - [User Accounts] and
select the account, and set the password.
B Click [start] - [Control Panel] - [Performance and
Maintenance] - [Power Options] - [Advanced] and
add a check mark for [Prompt for password when
computer resumes from standby].
(Start) - [Control Panel] - [Clock, Language,
page 56).
(Start) - [Control Panel] - [User Accounts
(Start) - [Control Panel] - [System and