Panasonic Toughbook CF-U1A1B1G2M Operating Instructions Manual page 5

<Only for model with wireless LAN>
This product is restricted to indoor use due
to its operation in the 5.15 to 5.25 GHz
frequency range. FCC requires this product
to be used indoors for the frequency range
5.15 to 5.25 GHz to reduce the potential for
harmful interference to co-channel Mobile
Satellite systems. High power radars are
allocated as primary users of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands.
These radar stations can cause interfer-
ence with and /or damage this product.
<For USA-California Only>
This product contains a CR Coin Cell Lithium Battery which contains
Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/
Models for Canada
Canadian ICES-003
This Class B digital apparatus com-
plies with Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
<Only for model with wireless LAN/
Bluetooth/GPS>
Industry Canada
This product complies with RSS310
Industry Canada.
Operation is subject to the following
two conditions;
(1) this device may not cause interfer-
ence, and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device.
<Only for model with wireless LAN>
This product (local network devices) for
the band 5150-5250 MHz is only in-
door usage to reduce potential for
Responsible Party:
Panasonic Corporation of North
America
One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP5 (1-800-
527-8675)
25-M-W-2
harmful interference to co-channel
Mobile Satellite systems.
High power radars are allocated as primary
users (meaning they have priority) of 5250-
5350 MHz and 5650-5850 MHz and these
radars could cause interference and/or
7-M-2
damage to LELAN devices.
This device has been designed to
operate with the WWAN antenna hav-
ing a maximum gain of 1.50 dB for the
cellular band and 3.50 dB for the PCS
band. WWAN anenna having a higher
gain is strictly prohibited per regulations
of Industry Canada. The Required
antenna impedance is 50 ohms.
To reduce potential radio interference
to other users, the antenna type and its
gain should be so chosen that the
30-Ca-1-1
equivalent isotropically radiated power
(EIRP) is not more than that required
for successful communication.
6-M-1
38-M-1
30-Ca-2-1
25-Ca-1-1
5