Remove The Card - Panasonic Toughbook CF-T5MWETABM Reference Manual

PC Cards
2

Remove the card.

Raise the bent part of the eject button.
A
Press the eject button so the card comes out of the slot.
B
Draw the card straight out.
C
NOTE
Check the card's specification to prevent the total operating current from exceeding the allowable limit. Otherwise mal-
function may occur.
Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA
After repeating insertion and removal, some types of card will not be recognized. In this case, restart the computer.
If the computer freezes after resuming from standby or hibernation, remove and reinsert the card. If the problem per-
sists, restart the computer.
When a card is inserted, power consumption increases. Remove the card when it is not in use, especially when oper-
ating by battery power.
To connect peripheral devices (SCSI, IEEE1394, etc.) using a PC Card, follow the steps below (one example).
Connect the peripheral device to the card.
A
Turn on the power of device.
B
Insert the card until it securely fits in the slot.
C
40