Getting Started; Hardware Revision Details; Related Documents; Description Of Components - Espressif ESP32-C6-DevKitC-1 User Manual

Ge ng Started: Overview of ESP32-C6-DevKitC-1 and hardware/so ware setup
instruc ons to get started.
Hardware Reference: More detailed informa on about the ESP32-C6-DevKitC-1's
hardware.
Hardware Revision
previous versions (if any) of ESP32-C6-DevKitC-1.
Related Documents: Links to related documenta on.

Getting Started

This sec on provides a brief introduc on of ESP32-C6-DevKitC-1, instruc ons on how to do
the ini al hardware setup and how to flash firmware onto it.

Description of Components

The key components of the board are described in a clockwise direc on.
Key Component
ESP32-C6-WROOM-1
Pin Header
5 V to 3.3 V LDO
3.3 V Power On LED
USB-to-UART Bridge
Details: Revision history, known issues, and links to user guides for
ESP32-C6-DevKitC-1 - front
Descrip on
ESP32-C6-WROOM-1 is a general-purpose module suppor ng Wi-F
All available GPIO pins (except for the SPI bus for flash) are broken o
Power regulator that converts a 5 V supply into a 3.3 V output.
Turns on when the USB power is connected to the board.
Single USB-to-UART bridge chip provides transfer rates up to 3 Mbp