Panasonic Toughbook CF-74JDMBD2M Supplementary Manual page 15

* 1 For information of these functions, refer to the UPEK Protector Suite QL Help menu.
(<Model with Windows XP> Click [start] - [All Programs] - [Protector Suite QL] - [Help]
/ <Model with Windows Vista> Click
- [Help])
Handling & Maintenance
The enrolling and authentication sensitivity may decline under the
conditions below. Wipe off stains or moisture on the sensor surface with
a soft cloth.
• The surface of the fi ngerprint sensor is soiled with dust, skin oil, or sweat.
• The surface of the fi ngerprint sensor is wet as a result of moisture or
condensation.
Static electricity may also cause the sensor to malfunction. To make your
fi nger static-free, touch a metal surface before placing it on the fi ngerprint
sensor. Exercise caution against static electricity in winter and other dry
conditions.
Malfunction or damage may occur when:
• The fi ngerprint sensor surface was damaged by the strong rubbing of a solid
material, scratches, or being pecked with a pointed item.
• The sensor was touched with a fi nger soiled with mud, damaging the sensor
surface with a tiny substance, and staining the surface.
• The sensor surface was covered with a seal, or soiled with ink.
Deleting (Initializing) Owner's Data
When you dispose of the computer or transfer the ownership, delete (initialize) the
owner's data to avoid unauthorized access.
NOTE
The data enrolled in the fi ngerprint sensor is not image data. You cannot
restore fi ngerprint image data from the data enrolled in the fi ngerprint sensor.
1
Disable Power-on Security
Performed by the Computer Administrator.
A <Model with Windows XP>
Click [start] - [All Programs] - [Protector Suite QL] - [Control Center].
<Model with Windows Vista>
Click
• The "Fingerprint Software Management" screen appears.
(Start) - [All Programs] - [Protector Suite QL] - [Control Panel].
(Start)- [All Programs] - [Protector Suite QL]
15