How To Use The Fingerprint Reader - Panasonic Toughbook CF-74JDMBD2M Supplementary Manual

Names and Functions of Parts

How to Use the Fingerprint Reader

This section explains how your fi ngerprints are enrolled and authenticated.
1
<CF-19 and CF-30 Series>
Slide your fi nger to the right or
left.
To prevent a reading error.
A Set the fi rst joint of your fi nger on
the sensor as illustrated to the
right.
B Slide your fi nger to the right or left
while keeping it in contact with the
fi ngerprint sensor.
C Slide your fi nger to the right or left
until the sensor is visible.
<CF-52 and CF-74 Series>
Slide your fi nger toward
yourself.
To prevent a reading error.
A Set the fi rst joint of your index
fi nger on the sensor as illustrated
to the right.
B Slide your fi nger toward yourself
while keeping it in contact with the
fi ngerprint sensor.
C Slide your fi nger down until the
sensor is visible.
When the fi ngerprint sensor does not enroll or authenticate your
fi ngerprint properly:
• You slid your fi nger too fast or too slow.
• Your fi nger was soiled or it has a scar on the surface.
• Your fi nger was wet or extremely dry.
• Your fi ngerprint does not have suffi cient data for personal identifi cation.
For further information, refer to "Troubleshooting (For Devices)". (
18)
4
<CF-19 and CF-30 Series>
Fingerprint sensor
or
Fingerprint sensor
<CF-52 and CF-74 Series>
Fingerprint sensor
page