Advertisement
6-2 Precautions When Working with Batteries
6-2-1 If battery acid contacts skin or clothing, wash immediately with soap and water. If acid
enters eye, immediately flood eye with running cold water for at lease 20minutes and get
medical attention immediately.
6-2-2 NEVER smoke or allow a spark or flame in vicinity of battery or engine.
6-2-3 Do not drop a metal tool on the battery. The resulting sparks or short-circuits on the
battery or other electrical part may cause an explosion.
6-2-4 Remove personal metal items such as rings, bracelets, necklaces, and
watches when working with a lead-acid battery.
A lead-acid battery produces a short-circuit current high enough to weld a ring or the like
to metal, causing a severe burn.
7. Appendices A
7-1. Dip Switch (at the left side of inverter)
S1
ON
OFF
----
----
S1: Freq (Hz)
S2/S3: Baud Rate
When you set up S1~S3, please reset the inverter and let update data through CPU.
7-2 Tune VR
Tune VR (VAC) output voltage from 100 – 120 VAC or 200 – 240 VAC
The VAC value will gradually increase, tune VR from right to left.
RE-MARK:
The user manual is subject to change without notice.
klick to
klick to
www
www
u-s-v
Y O U R C O N N E C T I O N TO S A F E T Y
ACDC-DCDC
FREQ. (Hz)
S2
60
ON
50
OFF
----
ON
----
OFF
klick to
www
Y O U R C O N N E C T I O N TO S A F E T Y
SYSTEME
S3
BAUD RATE
ON
2400
ON
4800
OFF
9600
OFF
19200
16
klick to
www
Y O U R C O N N E C T I O N TO S A F E T Y
Y O U R C O N N E C T I O N TO S A F E T Y
CONTACT
YOUR CONNECTION TO SAFETY
ACV-ADJ
H--------L
240V
200V
H--------L
120V
100V
----
----
klick to
www
Y O U R C O N N E C T I O N TO S A F E T Y
CALLBACK
Advertisement
