Maintenance - Gemini GBF40WH Instruction Manual

Bladeless hepa & carbon filter tower fan
Table of Contents

Advertisement

6、DISPLAY LIGHT STATUS
In normal wind and natural wind modes, if there is no operation for 60 seconds,
the screen brightness will be reduced by half, and if there is no operation for 10
minutes, the screen will turn off. In sleeping wind mode, if there is no operation
for 30s, the screen brightness will be reduced by half, and if there is no operation
for 5 minutes, the screen will automatically turn off.

MAINTENANCE

It is recommended to clean and maintain the machine every 3 to 4 weeks
to ensure that the fan works more efficiently and the air outlet is cleaner.
Remove the filter of the machine, use a vacuum cleaner or a dry brush for
cleaning, use a low-humidity dish towel to wipe the dust on the place where
the filter is placed, put the filter back and cover it after drying.
In order to ensure the purification effect, the filter can be replaced regularly
depending on the actual situation, and the customer service staff can be
consulted for the purchase of special accessories.
When cleaning the appearance of the product, please wipe the product
with a soft and clean cloth. To remove stubborn stains, be sure to use a
mild and neutral detergent. After cleaning, wait for the surface to dry before
turning it on.
Pay attention!
Before cleaning and maintenance, the power supply must be
disconnected, the whole machine should not be immersed in
water, and the machine should not be sprayed.
Pull the buckle
upward to open the
filter screen cover
HEPA
filter
6
Activated
carbon filter

Advertisement

Table of Contents
loading

Table of Contents