Table of Contents
Advertisement
OPERATION GUIDE
1、POWER ON/OFF
After plug on press the Power button"
work model. Press the Power button "
standby state.
2、ADJUST THE WIND SPEED
After power on, press the Speed button "
control to adjust the speed, the display will show corresponding speed. When
it is in the highest speed "12 ", if you touch the speed button "
speed will continue to cycle from speed 1. The speed will not cycle during
remote control operation.
3、MODE SETTING
Press the Mode "
model will change according to Normal wind-Nature wind-Sleeping wind.
Nature wind mode: This icon of Nature wind "
will show "
" , the wind speed simulates the natural wind, and the change of
large and small winds.
Sleeping wind mode: the icon of the sleeping mode "
screen will show "
4、TIMER SETTING
Press the Timer button "
the " h " will flash and display the timer time. The digit will will flash 5S means the
setting the timer successfully and the timer will start running. The timer setting
can be up to 12 hours. When " 00 " hours are displayed, the timer function is
turned off.
5、OSCILLATION SETTING
Press the Oscillation button "
angle can be 120°. Each time touching the Oscillation button "
angle will be 60°, 90°, and 120° in turn, until the oscillation function is turned off.
Pay attention!
Do not forcibly turn the fan's oscillation angle or external force
to hinder its normal oscillation process, otherwise it may
damage the mechanical structure of the fan and affect its use.
" on machine or remote control to set the wind mode, wind
" , the wind speed will be changed to suitable for sleep.
" for timer adjustment during the machine is working,
" start the oscillation funtion, the max scillation
", the machine will enter the normal
" again, the machine will enter the
" or press the " +/- "of the remote
" will light up, the display screen
5
" again, the
" will light up, the display
" , the oscillation
Advertisement
Table of Contents
