Panasonic Toughbook CF-52GGNBP2B Operating Instructions Manual page 20

Reinstalling Software
Using Recovery Disc
Use the Recovery Disc for reinstallation in the following conditions.
• You have forgotten the administrator password.
• Reinstallation is not complete. The recovery partition may be broken.
NOTE
• To change OS from 32 bit to 64 bit, or vice versa, reinstall OS using the recovery partition in the hard disk.
Preparation
Prepare the Recovery Disc (
Remove all peripherals.
Connect the AC adaptor and do not remove it until reinstallation is complete.
1 Turn on the computer, and press
The Setup Utility starts up.
• If the password is requested, enter the Supervisor Password.
2 Write down all of the contents of the Setup Utility and press
At the confirmation message, select [Yes] and press Enter.
3 Press .
F10
At the confirmation message, select [Yes] and press Enter.
Computer will restart.
4 Press or
F2 Del
The Setup Utility starts up.
• If the password is requested, enter the Supervisor Password.
5 Set the Recovery Disc into the CD/DVD drive.
6 Select the [Exit] menu, then select [Slimtype DVD...] in [Boot Override].
7 Press .
Enter
The computer will restart.
8 Click [Reinstall Windows] and click [Next].
The License Agreement screen appears.
9 Click [Yes, I agree to the provisions above and wish to continue!] and click [Next].
10 Select the settings and click [Next].
• [Reinstall Windows to the whole Hard Disk to factory default.
Select this option when you want to reinstall Windows to the factory default. After reinstallation, you can create
a new partition. For how to create a new partition, refer to "To change the partition structure" (
• [Reinstall to the first 3 partitions.]
Select this option when the hard disk has already been divided into several partitions. For how to create a new
partition, refer to "To change the partition structure" (
You can keep the partition structure.
*2
This does not appear if Windows cannot be reinstalled to the partition containing boot files and the area usable by Windows.
11 At the confirmation message, click [YES].
Reinstallation starts. (It will take approximately 70 minutes.)
According to the screen, replace the Recovery Disc.
• Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may become
unavailable as Windows may not start up or the data may be corrupted.
12 When ending screen is displayed, remove the Recovery Disc, and then click [OK] to
turn off the computer.
13 Turn on the computer.
• If the password is requested, enter the Supervisor Password.
14 Perform the "First-time Operation" (
15 Start the Setup Utility and change the settings as necessary.
16 Perform Windows Update.
20
Reference Manual "Recovery Disc Creation Utility")
F2
while [Panasonic] boot screen is displayed.
*2
or while [Panasonic] boot screen is displayed.
Del
page 15).
page 14).
.
F9
page 15)