Panasonic Toughbook CF-52EKMBGAM Reference Manual page 8

Sleep and Hibernation Functions
2
Select [Stand by] or [Hibernate] for [When I close the lid of my portable computer] / [When
I press the power button on my computer], and then click [OK].
NOTE
You do not need to make the setting if you use the Windows menu to enter standby or hibernation.
Precautions
Connect the AC adaptor if the computer will be in sleep
hibernation instead.
*2
Using sleep or hibernation repeatedly may cause malfunction of the computer. To stabilize computer operation, restart
Windows regularly (about once a week) without using sleep
Save the necessary data.
Close files you have opened from removable disks and network drives.
*2
Do not enter sleep or hibernation in the conditions below, otherwise the data or file may be corrupted, sleep
tion may not work, or malfunction may occur in the computer or the peripheral devices.
• When any of the drive indicator
• When playing/recording audio files or displaying motion video such as MPEG files.
• When playing a DVD-Video.
• When writing to a disc.
• When using communication software or network functions.
• When using peripheral devices.
(If peripheral devices fail to work normally, restart the computer.)
• When an external mouse is connected to the serial port.
The password you set in the Setup Utility is not requested at resuming. To enable it, select [Enabled] in [Password On
Resume] in the [Security] menu of the Setup Utility (
CAUTION
The following problems will occur when you fail the password input (failing three times or leaving the computer unat-
tended for one minute or more) while resuming from sleep
Failing the password input while resuming from hibernation:
• At the next resume, Panasonic boot screen will appear. At this time, do not start the Setup Utility and do not change
settings. Otherwise, resume may not operate correctly.
• Cannot resume from hibernation by the Wake Up from wired LAN function, the Task Scheduler or the operation to
open the display.
Failing the password input while resuming from sleep
• Cannot resume from sleep
*2
Windows XP: standby
*2
or the SD Memory Card indicator
page
*2
*2
using the USB devices.
for a long period of time. If you cannot use the AC adaptor, use
*2
or hibernation.
is on.
85).
*2
or hibernation.
:
8
*2
or hiberna-