Region Code Setting; Inserting/Removing A Disc - Panasonic Toughbook CF-52EKMBGAM Reference Manual

CD/DVD Drive
Using DVD Media
To play DVD-Video or MPEG files, you need to use DVD playback software such as WinDVD (

Region code setting

DVD-Video is allocated to region codes according to where they are sold. To play the DVD-Video, the player's software and
the drive must have the corresponding region code.
e.g., For U.S.A. and Canada: "1" / For Europe: "2"
The region code of the drive is not set at purchase. The operation depends on the DVD-Video that is first played.
• DVD-Video with a specific region code:
The drive will automatically be set at the same region code as the DVD-Video.
• DVD-Video with multiple region codes:
[Confirm Region] appears. Select the region code and click [OK]. Play now begins.
CAUTION
You can change the region code setting up to 5 times including the initial setting. Be extremely careful because you
cannot change the region code anymore after the fifth change, even if you reinstalled the operating system.
Any problem resulting from illegal changing or altering of the region code is the user's responsibility.
NOTE
[Confirm Region] appears when the DVD-Video has only 1 region code and the drive is set for another region code.
([Confirm Region] may not appear with some DVD-Video discs. To check the current region code and the number of
remaining times of changing the code, right-click on the WinDVD screen and click [Setup] - [Region].)

Inserting/Removing a Disc

1
Turn on the computer.
2
Press the eject button (A) and slowly pull out the tray.
3
Insert/Remove a disc.
To insert
Set the disc with the label side up and press the center of the disc until it clicks in place.
To remove
Press on the center spindle (B) and carefully lift up the edge of the disc.
4
Close the tray.
Do not press the eject button.
27
page 29).