High Altitude Instructions; Before You Begin; Locating The Model And Serial Numbers - Thermador PAALTKITGW Installation Instructions Manual

High altitude instructions

Before you begin

⚠
CAUTION
Before proceeding with the conversion, shut off the gas
supply to the appliance prior to disconnecting the
electrical power.
Disconnect the appliance from electrical power by
unplugging the electrical cord from its receptacle or by
disconnecting power at the circuit breaker box.
Tools needed
• T-20 star-head driver
• 7/16'' box end wrench
• 13/16'' box end wrench
• 7 mm or a 9/32'' socket
• 1/4'' nut driver
• 16 mm hex bit or 5/8'' hex bit or 16 mm Allen wrench
• T-30 star-head driver
• 1/2'' offset box end wrench
• 9/32'' open end wrench
• 7/8'' socket or 7/8'' open end wrench
• Adjustable wrench
• Soap and water mixture or leak-check solution

Locating the model and serial numbers

for the KI number
The rating plate shows the model and serial number of
your appliance. Depending on your model, the rating
plates are located above the main oven or behind the kick
plate.
6
/02
MODEL: PRG305WH
FD 0112 Z-Nr 0001
SERIAL NO.
ELECTRICAL RATING: 120 VAC, 60 Hz, 0.1
Customer Service: 1-800-735-4328
/02
MODEL: PRD304WHU FD 0112 Z-Nr 0001
FD: 021100050
PRG304W
kWatt
/05