Important Safety Instructions - Thermador PAALTKITGW Installation Instructions Manual

⚠ IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS
Please read carefully
Save the original gas parts for possible conversion back in
the future.
Important: Only a qualified service technician or installer
should make this conversion.
Installer: Please leave these instructions with this unit for
the owner.
Owner: Please retain these instructions for future
reference.
WARNING
If the information in this manual is
not followed exactly, a fire or
explosion may result causing
property damage, personal injury, or
death.
-- DO NOT store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
-- WHAT TO DO IF YOU SMELL GAS
• DO NOT try to light any appliance.
• DO NOT touch any electrical switch.
• DO NOT use any phone in your
building.
• Immediately call your gas supplier from
a neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier,
call the fire department.
-- Installation and service must be
performed by a qualified installer, service
agency or the gas supplier.
This kit is for converting Thermador appliances for
operation with propane (LP) gas. This kit contains orifices
for proper LP conversion for oven bake, broiler, and top
®
surface STAR burners.
A High Altitude kit is required for propane (LP) units
installed at altitudes of 10,000 ft. (3,048 m) and greater
elevation above sea level. Please see the back cover for
information about service, parts, and accessories.
4
This kit is used to convert select models of Pro Rangetop,
Pro Harmony, and Pro Grand ranges to propane (LP) gas
usage. This kit cannot be used to convert older models of
rangetops or ranges. This kit cannot be used to convert
any other brand of appliance.
WARNING
This conversion kit shall be installed by a
qualified service agency in accordance with the
manufacturer's instructions and all applicable
codes and requirements of the authority having
jurisdiction. In any case, the installation of this
conversion kit must conform with local codes or, in the
absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1/NFPA 54 or, in Canada, the Natural Gas and
Propane Installation Code, CSA B149, latest edition. If the
information in these instructions is not followed exactly, a
fire, explosion or production of carbon monoxide may
result causing property damage, personal injury, or loss of
life. The qualified service agency is responsible for the
proper installation of this kit. The installation is not proper
and complete until the operation of the converted
appliance is checked as specified in the manufacturer's
instructions supplied with the kit.
WARNING
Never Operate the Top Surface Cooking
Section of this Appliance Unattended
• Failure to follow this warning statement
could result in fire, explosion, or burn
hazard that could cause property damage,
personal injury, or death.
• If a fire should occur, keep away from the
appliance and immediately call your fire
department. DO NOT ATTEMPT TO
EXTINGUISH AN OIL/GREASE FIRE WITH
WATER.
For Massachusetts installations
1. Installation must be performed by a qualified or
licensed contractor, plumber, or gas fitter qualified or
licensed by the state, province or region.
2. Shut-off valve must be a "T" handle gas cock.
3. Flexible gas connector must not be longer than 36
inches.