Advertisement
Quick Start Guide
3
Step 2: Connect wiring and power-up
Select the proper cable assembly for your transmitter type:
Wall mount Use the cable assembly with the six contact pin flying leads.
Field mount Use the cable assembly with the two black plastic amp
1. Insert the metal end of the wiring assembly into the 8714D
Calibration Standard.
2. Connect the transmitter.
Wall mount
8712C
8712D
8712ES
8712EM
8750WDM
6
Emerson part number 08714-0205-0003
connectors. Emerson part number 08714-0205-0002
Figure 3-1
Figure 3-2
™
Rosemount
8714D (Calibration Standard) Magnetic Flowtube Simulator
Field mount
8732C
Figure 3-3
8742C
8732ES
8732EM
8750WDM
September 2022
Advertisement
