Advertisement
September 2022
2
Step 1: Change transmitter parameters
1. Use a Field Communicator or Local Operator Interface (LOI) to
change the parameters of the transmitter to the following:
Tube Calibration Number:
Units:
Analog Output range:
Analog Output Zero:
Coil Pulse Mode:
2. Set the loop to manual (if necessary).
3. Power down the transmitter.
Quick Start Guide
Quick Start Guide
1000015010000000
ft/s
20 mA = 30.00 ft/s
4 ma = 0 ft/s
5 Hz (6 Hz 8712C only)
5
Advertisement
