Table of Contents
Advertisement
HP ProLiant
2 Installing LoadMaster on the HP ProLiant
For further information on the different boot options that are
available, refer to the
The serial number should be automatically pulled from the
LoadMaster. If it is not, please enter it when prompted.
10. Select select disk/partition and press OK.
11. Select the target disk for installation and press OK.
12. Select delete existing partition(s) and press OK.
13. Select start installation and press OK.
14. Press OK. The installation should complete successfully.
7
Bare Metal Boot Options, Technical
© 2022 Progress Software Corporation and/or one of its subsidiaries or affiliates. All rights reserved.
Note.
Advertisement
Table of Contents
