Table of Contents
Advertisement
HP ProLiant
3 Configuring the LoadMaster Using the Console
3 Configuring the LoadMaster
Using the Console
If the LoadMaster does not automatically obtain an IP address using DHCP, or if you would prefer to
configure the LoadMaster using the console, then the following configuration steps must be
completed before starting the LoadMaster.
1. Login into the LoadMaster using the console with the following settings:
2. Enter the IP address of the eth0 interface, the network facing interface of the LoadMaster,
in the input field within the Network Side Interface Address dialog box.
3. Press OK.
13
- lb100 login: bal
- Password: 1fourall
© 2022 Progress Software Corporation and/or one of its subsidiaries or affiliates. All rights reserved.
Advertisement
Table of Contents
