Table of Contents
Advertisement
HP ProLiant
2 Installing LoadMaster on the HP ProLiant
24. Click the Add button.
25. Enter the domain name that is to be prepended to requests to the DNS nameserver into
the DNS NameServer input field.
26. Click the Add button.
27. Click the System Configuration > Network Setup > Default Gateway menu option.
28. In the DNS configuration screen, enter the IP address of the default gateway into the
IPv4 Default Gateway Address input field.
If you have an IPv6 Default Gateway, please enter the value in the IPv6 Default Gateway
Address input field.
29. Click the Set IPv4 Default Gateway button.
The LoadMaster is now fully installed and ready to be used. For further information on how to
configure and implement the Virtual LoadMaster, please refer to the LoadMaster documentation
which can be downloaded from the
12
http://kemptechnologies.com/documentation
© 2022 Progress Software Corporation and/or one of its subsidiaries or affiliates. All rights reserved.
page.
Advertisement
Table of Contents
