Table of Contents
Advertisement
HP ProLiant
3 Configuring the LoadMaster Using the Console
4. Enter the IP address of the default gateway in the input field of the Default Gateway
dialog box.
5. Press OK.
6. Once these are set, a prompt will appear asking to connect to the web interface at the
newly configured IP address. In an internet browser enter the IP address of the eth0 entered
in Step 2.
Ensure to enter https:// before the IP address.
7. A warning may appear regarding website security certificates. Please click the
continue/ignore option.
8. The LoadMaster End User License Agreement screen appears.
9. Please read the license agreement and, if willing to accept the conditions therein, click
on the Agree button to proceed.
10. If the machine has shipped with a temporary license, a warning will appear informing
that a temporary license has been installed on the machine and for how long the license is
valid.
11. Click OK.
12. The home screen of the LoadMaster should appear.
The LoadMaster is now fully installed and ready to be used. For further information on how to
configure and implement the Virtual LoadMaster, please refer to the LoadMaster documentation
which can be found here: https://kemptechnologies.com/documentation.
14
© 2022 Progress Software Corporation and/or one of its subsidiaries or affiliates. All rights reserved.
Advertisement
Table of Contents
