Advertisement
5. Brace the top of the door against your body.
Grasp both sides of the outer edges of the pane
at the bottom of the door.
6. Gently pull the pane toward the top of the door.
7. When the pane is clear of the clamp at the
bottom of the door, lift the pane slightly.
After Cleaning, Replace the Door Glass Panes
When replacing the glass panes, make sure that:
• You replace all panes correctly, as shown. Each pane must be in the position described below in order to fit into
the door and to ensure that the oven operates safely and correctly.
• You take extra care not to bump the edges of the glass against any object or surface.
• You do not force any of the panes into place. If you are experiencing difficulties replacing the panes, remove
them and start the process again from the beginning. If this still does not help, call Customer Care.
1. Insert the pane into the lower notch on the top clamps at the top of the door.
2. Carefully pull the pane toward the top of the door.
3. Slot the pane into the lower notch on the bottom clamps at the bottom of the drawer.
https://producthelp.fisherpaykel.com/Manuals/Companion_Product_Manuals/User_Guides/590915A_Built-In_Oven_Pyrolitic/1...
After the steps described
above are carried out, the
pictures will be
immediately deleted
without any additional
confirmation queries.
8. Slide the pane out of the top clamp and lift out.
Updated: Sun, 09 Apr 2023 02:23:38 GMT
Powered by
12
Advertisement
