Anova F2022 Assembly Instructions

Anova F2022 Assembly Instructions

Ada table

Advertisement

Quick Links

Contact Us:
800.231.1327
specify@anovafurnishings.com

Tools Needed:

• Ratchet with 1/2" Socket
• 1/2" Open-end or Box-end Wrench
• Rubber Mallet

Component parts:

(4) Table Supports

Hardware Needed:

(32) 5/16"-18 x 1 1/4"
Hex Head Bolts

Assembly:

This assembly is a two-person operation.
1.
Inspect the shipping container contents for damaged or missing components.
2.
Lay all parts on a soft work surface or on the shipping packaging to prevent damage to finish.
NOTE: Before assembly, it is recommended that a light oil or petroleum jelly be applied to screw threads.
Assembly Instructions
ADA Table
F2022 - 8' ADA Rectangular Expanded Steel Table, Fusion Adv,
Portable Frame
(1) Table Top
(2) Short Seat Platforms
(32) 5/16-18
Nylock Nuts
(1) Long Seat Platform
(64) 5/16 Flat
Washers
(4) Cross Braces
(8) Rubber Feet
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F2022 and is the answer not in the manual?

Questions and answers

Summary of Contents for Anova F2022

  • Page 1 Assembly Instructions ADA Table F2022 - 8’ ADA Rectangular Expanded Steel Table, Fusion Adv, Portable Frame Contact Us: 800.231.1327 specify@anovafurnishings.com Tools Needed: • Ratchet with 1/2” Socket • 1/2” Open-end or Box-end Wrench • Rubber Mallet Component parts: (1) Table Top...
  • Page 2 Assembly Instructions ADA Table Locate the table support and two rubber feet and place them as shown. Insert the two rubber feet into the bottom of the table support. Use a rubber mallet if necessary. Repeat steps 3 and 4 with the remaining table supports and rubber feet.
  • Page 3 Assembly Instructions ADA Table Mount a cross brace to a table support by inserting one hex head bolt and flat washer through the mounting holes. Place a washer and nylock nut on the end of the bolt and tighten finger tight. Repeat this step to mount the remaining cross braces on the other table supports Align the two cross braces with the...
  • Page 4 • This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to remove surface MAINTENANCE dirt. Do not clean with a solvent or petroleum based products. 12/12/2022 Copyright 2022 Anova ® Manufactured in the U.S.

Table of Contents