Panasonic Toughbook CF-19K4RAX2M Operating Instructions Manual page 18

First-time Operation
NOTE
PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maximum data volume for each
record is 1024 bytes.
This information is only used for estimating the cause when the hard disk goes down by any possibility. They are never
sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information history]
in [Hard Disk Status] of PC Information Viewer, and click [OK].
( Reference Manual "Checking the Computer's Usage Status")
Precaution against Starting Up/Shutting Down
Do not do the following
Connecting or disconnecting the AC adaptor
Sliding the power switch
Touching the keyboard, touch pad, touchscreen, dual touch or external mouse
Closing the display
Turn on/off the wireless switch
NOTE
To conserve power, the following power saving methods are set at the time of purchase.
The screen automatically turns off after 15 minutes of inactivity.
The computer automatically enters sleep
*4
Refer to Reference Manual "Sleep or Hibernation Functions" (
tions" (
18
A Run [Tablet PC Settings].
Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
B Click [Calibrate].
C Select [Pen input].
D Using the digitizer pen, touch each of the "+" target marks one by one, and
then click [Yes].
Perform the calibration for the orientation to be used.
A Run [Tablet and Pen Settings].
Double-click
ware] - [Tablet and Pen Settings].
B Click [Settings] - [Calibrate].
C Using the digitizer pen, touch each of the 4 "+" target marks one by one, and
then click [OK].
Perform the calibration for both [Landscape] and [Portrait].
7 Restart the computer.
8 Create a new account.
Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
CAUTION
Remember your password. If you forget the password, you cannot use the Windows
operation system. Creating a password reset disk beforehand is recommended.
*4
(
) about resuming from sleep/standby.
or click [start] - [Control Panel] - [Printers and Other Hard-
*4
)/standby (
)/"Standby or Hibernation Func-
) after 20 minutes of inactivity.