Installing The M.2 2280 Solid-State Drive - Dell Latitude 3440 Service Manual

Steps
1. Remove the screw (M2x2) that secures the M.2 2280 solid-state drive to the system board.
2. Slide and remove the M.2 2280 solid-state drive from the M.2 card connector on the system board.

Installing the M.2 2280 solid-state drive

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the M.2 2280 solid-state drive and provide a visual representation of the
installation procedure.
32 Removing and installing components