Installing A 2.5-Inch Drive - Dell EqualLogic PS4100 Hardware Maintenance Manual
Hide thumbs
Also See for EqualLogic PS4100:
- Hardware manual (50 pages) ,
- Installation and setup manual (41 pages) ,
- Configuration manual (152 pages)
Table of Contents
Advertisement
PS4100 Hardware Maintenance Guide
Maintaining Drives
Figure 8 Removing a 2.5-Inch Drive
Installing a 2.5-inch Drive
The 2.5-inch drives are installed vertically, with the drive release latch on the top and the drive label on the
bottom.
1. Wear electrostatic protection when handling a drive. See
Protecting Hardware on page 1.
2. Open the drive release latch.
3. Hold the drive by the carrier and slide the drive most of the way into a slot (callout 1 in
Figure
9).
11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
