Touchpad; Removing The Touchpad - Dell Latitude 3440 Service Manual

Steps
1. Place the thermal fan into its slot on the system board.
2. Align the screw holes on the thermal fan to the screw holes on the system board.
3. Replace the two screws (M2x3) to secure the thermal fan to the system board.
4. Connect the thermal-fan cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Touchpad

Removing the touchpad

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following images indicate the location of the touchpad and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 39