Steps
Place the display back cover on a flat surface.
Next steps
1. Install the
eDP
cable.
2. Install the camera.
3. Install the
display
panel.
4. Install the
display
bezel.
5. Install the
display
assembly.
6. Install the
base
cover.
7. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
M.2 2230 solid-state drive
5. Remove the
wireless
card.
6. Remove the
thermal
fan.
7. Remove the
thermal
heat-sink.
8. Remove the
coin-cell
9. Remove the
display
assembly.
10. Remove the
I/O
board.
11. Remove the
power
button.
After working inside your
Before working inside your
or the
M.2 2280 solid-state
battery.
computer.
computer.
drive, whichever applicable.
Removing and installing components
73