Troubleshooting - Panasonic Toughbook CF-08TX1A1M Operating Instructions Manual

Troubleshooting

Follow the instructions below when a problem has occurred. For a software prob-
lem, refer to the software's instruction manual. If the problem persists, contact
your technical support office.
Starting Up
Cannot start up.
The power indica-
tor or battery indica-
tor is not lit.
Cannot turn on the
wireless display.
You have forgotten
the password.
The date and time
are incorrect.
Other startup prob-
lems.
Display
No display.
The screen is dark.
Touchscreen
The cursor does not
work.
Cannot point the
correct position
using the included
stylus.
Connect the AC adaptor.
Insert a fully charged battery.
Remove the battery pack and the AC adaptor, then con-
nect them again.
Leave it in an environment of 5 °C {41 °F} or higher
temperature for about an hour, then turn on the power
once more.
Supervisor Password or User Password: Contact your
technical support office.
Make the correct settings. Double-tap
desktop, and double-tap [Date/Time].
Remove all peripheral devices.
The display is turned off by the power-saving function.
To resume, touch the LCD.
The wireless display powers off by the power-saving
function. To power on, press the power button.
Adjust the brightness. As you increase the brightness,
battery consumption increases.
When using the external mouse, connect it correctly.
Perform the touchscreen calibration (
on the
page 34).
55